My Homepage

11 Measures to Spray Paint Your Car Like the Professionals - Automobile Bodywork Paint Repair

11 Measures to Spray Paint Your Car Like the Professionals - Car Bodywork Paint Repair

You will be surprised to find only how you can spray on car paint actually can be easy. That doesn't mean that you can just grab a tin of paint and go at it. There are some basics you have to understand. Both in application and the preparation.

Step A:

Prepare by gathering all your things that you are going to need.

Measure B:

You'll have to analyze the car for any rough spots. These will need to be sanded with 300 grit sand paper. It also allows the spray auto paint to stick better. After you have Alloy Wheel Repair Harold Hill finished sanding, ensure all of the dust dirt and debris are removed from the vehicle. It's imperative the auto be absolutely clean.

Measure C:

This will make sure you get an overall even coat of your coloured paint plus helps the paint to adhere nicely. Be sure to apply light layers and allow for drying in between when you spray the primer. The way to spray auto paint takes a little getting used to.

Step D:

Now you might be well to the point at which you are around ready to spray on the colour. You may have decided to use the spray auto paint that comes in aerosol cans, or maybe you've selected for the spray gun. Before you begin with the automobile in any case, make a couple of practice strokes on an item. Once you might be ready, start the passes with the paint without reluctance. If you hold the spray can or gun in one area, you may end up getting uneven coverage and potentially the paint will run. Should this happen you've got a major repair job on your had. You will most probably have instructions regarding how you can spray auto paint using the equipment or spray cans.

Step E:

Check with someone which is comfortable with how to spray on auto paint, or you might want to research this alternative on the web

Step F:

You're down to the finishing touches once you are absolutely satisfied with the shade. You will now want to apply several clear coats. This will give the finished and shine look to the car together with protect the finish. It will be up to you personally although likely two coatings will be adequate. Make absolutely certain it's dry in between coats.

Step G:

Yet again, you've got the choice of wet sanding if you favor. Again, it is suggested you request the advice of people which can be comfortable with how to paint a car. You need to wet sand with the following grits in this sequence if you determine to follow this measure then. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that may be overly heavy in the clear coating application.

Step H:



Step I:

You should buff the surface. To do this just use a medium cut polish.

Step J:

As a final touch, you may want to apply a couple of layers of wax.